056 Land Rover Series 1 front base


Series1 front end base kit, starter kit for all Series1 models.


Land Rover Series 1 front base kit

This is the part of the series 1 Land Rover that is common to all of the variants I propose to offer. This kit consists of the front end cab with front doors, seats, steering wheel, front end including bonnet, & windscreen.

Start with this base then add any back kit to complete the model. The back kit will include: relevant chassis, back, seats, road wheels, roof and doors.

This is just the front end base kit, a suitable back/rear end needs to be added to make a full model

The interiors of the Series1 were pretty standard – except for the dash, some had shelves above and below the centre Dial cluster, some had no shelves, some just a lower shelf, some just the upper. I have printed both shelves, either – or both – can be easily removed if desired.

The Series 1 came in several wheelbase lengths, 80”, 88”, 86” and 107”.

The front wing mounted lights varied on series 1 models as well, form none through one to two. I have included 2 so that they can be removed if desired. Early models had trafficators mounted in the door pillar later had indicators and side lights on the front of both front wings.

Grills varied as well with some having a full mesh grill in the centre panel covering the headlights and others with the mesh cut away from the lights. Due to the size restrictions of the nozzle with FDM printers it isn’t practical to print the mesh for the front.

Additional information

Weight 100 g
Dimensions 100 × 100 × 54 mm

1:35, 1:43, 1:48, 1:56 28mm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.