1 in stock

SKU: mma002 Category:


Our acrylic line of paint is non-solvent based and odourless. We have invested hours of time researching and developing this new line to meet our high standards and the ability to offer the best paints for scale modellers and graphic artists. Mission Models paints incorporate the finest ground and highest quality lightfast pigments. Our Formula is triple pigmented and does not include any additional thinners or reducers which in time can cause a breakdown of the paint and diminish shelf life and quality.

Because our paint is triple pigmented and ultrafine you will find that MMP offers superior and beautiful coverage utilizing thin coats from the airbrush. Due to the fact that our pigments are so fine spraying through airbrushes with .015 and .2 needles found on many airbrushes is not a problem as with so many other hobby paints.

Our paints are airbrush ready and can spray straight from the bottle with no issue and minimal tip dry. We do recommend adding one or two drops of our Polyurethane Intermix when spraying straight from the bottle for enhanced flow and slower drying time when atomizing from the airbrush tip.

We have extensively tested in all conditions from winter cold to 105 degrees with 90% humidity with virtually no tip dry and no clogging of the airbrush. Although our paint is designed for airbrushing but also ideal for brush painting.

Mission Models Paints will accept all manufactures clear coats without conflict.   Yet we recommend our own clears.

Oil and enamel rendering, tinting and washes will pose no problems.

We also offer our own Thinner which is technically a reducer.  Our acrylic Thinner/Reducer acts as two different products. It is your Thinner and your airbrush cleaner. Many other products on the market require a separate reducer, flow enhancer, thinner and AB cleaner. Not ours. Simply add the thinner to your paint, mix to the recommended ratio of 20 to 30% to 1.  (2 or 3 drops thinner to 10 drops paint)  and your done.

Although the paint performs flawlessly straight from the bottle thinning it down with our Thinner / Reducer brings out the best.   Mission Models thinner is also your airbrush cleaner. It is NON ammonia based and will not strip the finish off your tools.

Additional information

Weight 100 g
Dimensions 40 × 40 × 100 mm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.